customerservice
@
puregbi.com
1-866-498-5269
MODEL# 8650IT - PAGE 10
ASSEMBLY INSTRUCTIONS
A.
Raise the Footrest Plug (18)
B.
Insert (9) with hole
facing upwards
C.
Pull plastic string to expand spring
until the metal ring is aligned with the
hole in the rear. Insert Bolt (32) and
secure with Nut (21) and Washer (33).
D.
Cut
string and
insert cap
(46).
STEP 3:
A.
Insert Foam Roller Tube (20) into bottom opening in Body Height Adjustment Tube (7) as shown, and tighten with 1x (32)
Hexagonal bolt, 1x Flat Washer (33) and 1x M6 Lock Nut (21).
B.
Insert the Adjustable Leg Hold Tube (9) into the Adjustment Tube (7). Attach the Footrest Plug (18) to the Adjustment Tube, and
secure the spring to the rear of the Adjustment Tube (7) with 1x M6 Bolt (32), 1x Flat Washer (33) and 1x M6 Lock Nut (21) (See
diagram above left for detailed directions.)
C.
Insert 2 x Foam Rollers (49) onto Foam Roller Tube (20) and 2 x Foam Rollers onto the Adjustable Leg Hold Tube (9). Slide the
Foot Rest Plate (8) into bottom of Body Height Adjustment Tube (7) and tighten with 1x M8x45 Hex Bolt (29), 1x Flat Washer (25), and
1x M8 Lock Nut (45).
D.
Insert the Body Height Adjustment Tube (7) into the Backrest Support Frame (3) tubing. Secure it with Plug with Ring (23) and
Frame Plug-with spring (22). Make sure that these connections are tight and secure before continuing.
NOTE:
On some models, the Safety Lock will ship attached. If this part is not pre-assembled, please follow Step E:
E.
Remove attached hardware and attach the L-Shaped Hook (44) through the hole in the Front of the A-Frame. Secure from the
other side in the following order: 1 x Spring-2 (47), 1 x M8 Washer (25), 1x M8 Lock Nut (45).
32
49
49
49
20
32
45
47
44
22
23
3
45
25
8
9
29
33
21
18
7
33
9
18
21
46
49