19-00132_MTS8-24_Standard_Installation_Manual_082819_Rev4.docx
Page 14 of 24
Oil Analysis and Service Schedules
When a pura
DYN
®
Bypass Oil Filtration System is installed as an aftermarket item,
prepare the following:
1.
Change oil and full flow filter at the time of initial installation. Take a sample from the old and
the new oil to establish a baseline for comparison.
2.
Then, at one-half manufacturer recommended oil service interval, change the
pura
DYN
®
replacement filter, full flow filter and take an oil analysis sample.
3.
Thereafter, change the
pura
DYN
®
replacement filter and perform oil analysis at the scheduled
interval shown below or as oil analysis indicates. Continue using oil if lab report indicates oil is
up to the specification for continuing use.
Note
: Oil samples should be taken while the engine is running at normal operating temperature.
Recommended Oil Analysis & Service Schedule to Extend Oil Life
Service Item
Before
Install
After
pura
DYN
®
Install
One Half
Interval
OEM
Interval
OEM
Interval
OEM
Interval
Take Oil
Analysis
Sample
(New Oil
Baseline)
Change
pura
DYN
®
Filter
Change Full
Flow Filter
Change Oil
*
*
*
*
*
Oil change required when lab results indicate
