Pura Vida PV2-42C, Operation & Installation Instructions, Page: 7 / 16

5 | P a g e
Figure 1. Diagram of flow
FLOW RATES
For detailed flow rates see page 11.
LOCATION
Place UV system in an area to ensure there is enough
space at the lamp connector end to safely remove the
UV lamp and/or quartz sleeve (Figure 2). The controller
will require a ground fault circuit interrupter (GFCI or
GFI) outlet and should be mounted beside or above
the chamber. Ensure controller can be mounted upright
& not directly exposed to the elements. If installing
unit in horizontal position, you must assemble all
components in vertical position.
PUMP FILTER
HEATER SALT CELL OR CHLORINATOR
PV2
UV
Figure 2. Lamp
Removal Spacing
leave at
least an
additional
chamber
length to
facilitate
lamp and
sleeve
removal
RECOMMENDED PLACEMENT
OUTLET
INLET
INLET
OUTLET