Pura Vida PV2-42C Operation & Installation Instructions Download Page 15

1 3 |

P a g e

For Warranty Service

SELECT POOL PRODUCTS will not be liable for any incidental or consequential damages, 

losses, or expenses arising from installation, use, or any other causes. There are no 

express  or  implied  warranties,  including  merchantability  or  fitness  for  a  particular 

purpose, which extend beyond those warranties described or referred to above.

Please visit: www.selectpoolproducts.ca/warranty-submission-form to submit a 

warranty claim for any part considered defective. Proof of purchase as well as part 

numbers will be required.  Select Pool Products will contact you within 48 hrs to process 

the claim. Please do not replace or discard any parts until instructed to do so by Select 

Pool Products. For further assistance call 1-855-881-0889.

This limited warranty is the sole and exclusive warranty made by SELECT POOL 

PRODUCTS   with respect to this ultraviolet disinfection product, and is given in lieu 

of any other warranty. To the extent allowed by applicable law, any and all express or 

implied warranties not set forth herein are waived and disclaimed, including any implied 

warranty of merchantability or fitness for a particular use. 

SELECT pOOL PRODUCTS’ 

liability under this limited warranty is limited solely to those liabilities set forth above. 

In the event that any provision of this limited warranty should be found to be or become 

invalid or unenforceable under applicable law, the remaining terms and conditions hereof 

shall remain in full force and effect and such invalid or unenforceable provision shall be 

construed in such a manner as to be valid and enforceable.

WARRANTY REGISTRATION

It is imperative that you complete the warranty registration process. This not only 

registers your UV disinfection system for the provided manufacturer’s warranty, but 

also allows the factory to provide you with any important product updates or technical 

bulletins concerning your product. The registration process is a simple process and can 

ONLY be done online at 

www.uv-warranty.com

. Please ensure that ALL information is 

filled in, including a valid e-mail address. 

PLEASE NOTE:

 This information is for the sole 

purpose of technical support for your disinfection system and will not be used, or sold, 

to any other organization for any other purpose.

Summary of Contents for PV2-42C

















Reviews: