4
Installation Instructions:
WARNING: It is highly recommended to have your Water Dispenser installed by a licensed plumber. If you are
installing the Water Dispenser yourself, the following information is important: It is your personal responsibility
to adhere to all Governing State, Federal, Provincial and Local Plumbing Code Regulations.
Depending on the type of plumbing in your home (copper or flexible pipe), the following plumbing installation accessories
(not included with the Water Dispenser) will be required to complete the installation of your Water Dispenser. These items can be
purchased at your local hardware store.
(A) 1/2” Copper Tee
(D) 1/2” x 1/2” x 1/2”
Quick-Grip Tee
Tools Required
Tools Required
(B) 1/2” Male Solder x
1/4” OD Compression
Fitting Shut-Off Valve
(E) 1/2" Quick-Grip x 1/4"
OD Compression Fitting
Shut-Off Valve
(C) Installation Appearance
(F) Installation Appearance
Copper Pipe Plumbing (Soldering Required):
Flexible Pipe Plumbing (No Soldering or Glue Required):
• Soldering flux
• Solder
• Emery cloth
• Plastic pipe/tube cutter
• Copper tube/pipe cutter
• Welding torch
• Towels (water clean-up)
