9
1. Pull the unit outwards from the carton and place it on the floor.
2. Check if the spare parts are complete the same as the spare part list:
3. Take out the wheels to assemble. Note: Two wheels with stopper
are for the two front holes (fig.1).
4. Filling the water tank: Pull out the water tank compartment at the
side of the unit (fig 2), or open the top cover (fig 3), and fill the tank
with water slowly, and slowly pour water inside.
Notes:
- Water level must be between the MIN and MAX line.
- After few days operation, dust and dirt may reserve in water tank. It is recommended to
change water and clean water tank frequently.
5. To empty the tank, remove the drain cap (fig.4) from the rear part of the appliance.
6. Get the plug to power and turn on the unit power switch. A short “Beep” sound can be
heard and the power indicator will be on.
OPERATION
fig.1
wheel
wheel with
stopper
Part
Quantity
Remote control
1
Instruction manual
1
Wheel
2
Wheel with stopper
2
PARTS
EN
control
panel
louvres
air flow
outlet
cooling
pad
rear filtration
mesh
water tank
fan
blades
side mesh
casters
side cooling
pad
front mesh
fig.2
fig.3
fig.4
