11
If there is something wrong during operation, it may not be the unit’s problem. You may check against the
following list before send for repair:
Notice:
· If the problem cannot be found in the list or it persists, please contact our service center or a qualified
technician for further inspection.
· Do NOT open and repair the unit by yourself. Use only qualified agents for repairs or services.
TROUBLE SHOOTING
Problem
Possible reasons
Solutions
Not working
1. The plug is not
securely inserted
into the socket or not
connected well.
2. The “ON/OFF” button
is not pressed.
1. Insert the plug pin
into the wall socket
and make sure it is
connected well.
2. Press “ON/OFF” button
after plugged.
Dedust effect/ventilation
not good.
1. The filtration mesh is
clogged with dust and
dirt, which affects the
unit’s performance.
2. The air vent is
obstructed.
1. Clean the filtration
mesh.
2. Remove the foreign
objects from the air vent.
To clean the filter and the tank, first remove filtration mesh, then the fixing plate, and finally the panel.
FILTER
1. Clean filter and panel with mild detergent and soft brush.
3. Make sure filter and panel are completely dry before installing.
WATER TANK
1. Clean the water tank with a little mild detergent on a towel and then rinse in water.
2. Dry the tank with a soft cloth.
OUTER CASING
The surface of the appliance can be cleaned using wet cloth with a little mild detergent. Do not rinse directly
with water.
STORAGE
Switch off and unplug the unit.
Clean or change the filter.
Clean and dry the water tank. Turn on the unit for a while, so the inside can dry out completely.
It is recommended to store the unit in it’s original carton. Do not stack heavy objects on top of the unit.
EN
