PUPPYOO T10 Home, Operating Manual, Page: 16 / 40

13
WARNING:
Recharging
4 5
3
Drill hole depth:
40mm-50mm
(or 1.6 - 2 inches)
Peel off the installing
postion sticker. 1 2
960mm
Docking Station Installation
Caution: Please place the machine on the docking station for at least 2.5 hours before you use it the first time in order that it is
fully charged. Once fully charged, all THREE blue LED indicators will be on.
1. Unplug from the outlet when not in use for extended periods.
2. Do not install the docking station at places directly exposed to sunlight. Charge this machine in an area with a
temperature of 5
℃
to 36
℃
.
3. The machine will cut out and get charged automatically when placed on the docking station.
4. The temperature of main body and adapter will normally increase when the machine is recharging.
5. The charging time and run time of the machine will be different if the machine temperature changes.
6. Machine can be used before fully charged, but the run time will be shorter.
7. Do not use with a damaged cord or plug.
8. Use only the original adapter for charging this machine as others may damage this machine.
Attach the sticker to the wall
with the bottom of the sticker at
least 960mm (or 37.8 inches)
above the floor.
Drill holes through positions suggested on the sticker by
eletrical tools such as electric hammer drill or screwdriver.
Insert the anchors
in the drill holes.฀
Place the docking station on the
positions indicated on the stricker and
drill the docking station on the wall.