PumpSpy PS1000 Installation And Operating Instructions Manual Download Page 2

SAFETY FIRST !

WARNING

WARNING INDICATES A POTENTIALLY 

HAZARDOUS SITUATION WHICH, IF NOT 

AVOIDED, COULD RESULT IN DEATH, SERIOUS 

INJURY OR MAJOR PROPERTY DAMAGE.

This instruction manual contains very important information for you to know and understand.  This 

information is provided for your safety and to help prevent equipment problems from occurring. Please 

observe all safety information labeled danger, warning and caution.

RISK OF ELECTRIC SHOCK. TO REDUCE THIS RISK, OBSERVE THE FOLLOWING 

WARNINGS:

WARNING! 

 To reduce the risk of electrical shock, this system must be properly grounded in accordance with 

the National Electric Code (NEC) and all applicable state and local codes and ordinances. The receptacle should be 
protected with a Ground Fault Circuit Interrupter (GFCI).

WARNING! 

  To reduce the risk of electrical shock, always disconnect the pump / system from the power source and 

battery BEFORE handling or servicing.

WARNING!  

Never remove the ground prong from the plug, or use an adapter that eliminates the ground prong.

WARNING! 

  Never plug this pump system into an electric outlet while standing on a wet surface.

WARNING! 

 Cables should be protected at all times to avoid punctures, cuts and abrasions that may result in exposed 

wiring. Never handle connected power cords with wet hands.

WARNING!

  The PumpSpy

 System has not been investigated for use in or around swimming pools, marine areas, 

recreational water installations, decorative fountains or any installation where human contact with the pumped fluid is 

common. 

WARNING! 

Do not use an extension cord. Extension cords could present a safety hazard if not properly sized, 

become damaged or the connection falls into the sump pit. Do not attempt to disassemble the PumpSpy controller or 

Backup Pump. There are no field serviceable parts or repair options! 

RISK OF EXPLOSION.  TO REDUCE THIS RISK, OBSERVE THE FOLLOWING 

WARNINGS:

WARNING!  Do not use to pump flammable or explosive liquids such as gasoline, fuel oil, kerosene, etc. 

WARNING!  Do not use in a flammable or explosive atmosphere. 

NOT SUITED FOR POTABLE WATER APPLICATIONS. 

WARNING! 

 Do not use this pump to transfer water that will be used for potable (drinking) water.  This pump is only 

to be used in applications for which it is designed.

CAUTION INDICATES A POTENTIALLY HAZARDOUS 

SITUATION WHICH, IF NOT AVOIDED, MAY RESULT IN  

MINOR INJURY OR PROPERTY DAMAGE.

CAUTION

TO REDUCE THE RISK OF HAZARDS THAT CAN CAUSE INJURY OR PROPERTY 
DAMAGE, OBSERVE THE FOLLOWING WARNINGS:

CAUTION!  Do not use discharge hose. Discharge hose may whip under pressure. Use rigid piping and fittings to 

secure the pump in the sump basin to reduce movement.

CAUTION! 

Do not install the pump if it has been damaged in any way. 

CAUTION! 

Do not carry or lift the pump by the power cord. Use the pump’s lifting handle.

© PumpSpy Technology, LLC   Questions? 

Call Tech Support: 515.999.6935

Summary of Contents for PS1000









Reviews: