Step 1
Allign Both Drive’s Teeth.
Step 2
Put Coupling Guard to One side, and connect teeth
Step 3
Once teeth have been alligned, move guard over
Step 4
Insert 1 Locking Bolt and Feel out the Locking Groove
Step 5
Once In Position, Insert the 2nd Locking Bolt.
Step 1
- Make sure you have 1x Coupling Guard, 2x Eye Bolts.
- Turn all Cables by Hand to loosen any joints.
Step 2
- Put the Coupling Guard on one of the drives and expose the joiners.
- Allign both of the drive’s teeths
(It’s recommended to turn the other side of your power drive end to
make sure everything is turning and in order)
Step 3
- Once Alligned and checked everything is moving correctly, slide the
Coupling Guard over the Join.
Step 4
- Insert one of the eye bolts in, Using it as a Guide pin.
Step 5
- Insert your second eye bolt and then lock down both bolts into
position.
Installation of the Drive Extension Coupling
PAGE
12
PHONE: 1800 790 915
PUMPS AUSTRALIA PTY LTD
USER MANUAL
PHONE: 1800 790 915
PUMPS AUSTRALIA PTY LTD
