PB3 User Instruction
Page 34 of 39
WARNING
The use of parts other than PUMPIRAN approved parts may create hazardous
conditions over which PUMPIRAN has no control. Such hazardous conditions can
lead to injury, or result in damage to the equipment. PUMPIRAN does not support
nor will be responsible for the use of non-PUMPIRAN furnished parts or the use of
materials that are not as originally furnished without the expressed written approval
of PUMPIRAN.
5.2.2 Service instructions
For emergency repair service, contact the PUMPIRAN After Sale Service Department.
5.2.3 Storage of spares
Spares should be stored in a clean dry area away from vibration. Inspection and re-treatment of metallic surfaces
(if necessary) with preservative is recommended at 6 monthly intervals.
5.3 Recommended spares and consumable items
A recommended spare parts classification is offered for PUMPIRAN parts furnished on this unit. The
classification of a required part can be identified by referring to the appropriate assembly drawing and parts list
included in section 7 of this manual.
The PUMPIRAN Sales
Representative
in your area will gladly review the class of spares best suited to your
requirement.
NOTE
No special tools are required to assemble or disassemble the pump. Common
mechanical tools are sufficient. However we recommend torque wrench to tighten
and remove all fasteners.
