PB3 User Instruction
Page 14 of 39
2.4.4.1 Painting and preservation
Paints and preservatives used are either PUMPIRAN standard or special as required by the contract
specification. Refer to 2.1.3, Paint/Rust Preventive for the description of paints and preservatives used in this
order or contact the branch office through which the order was placed.
2.5 Recycling and end of product life
At the end of the service life of the product or its parts, the relevant materials and parts should be recycled or
disposed of using an environmentally acceptable method and local regulations. If the product contains
substances which are harmful to the environment, these should be removed and disposed of in accordance with
current regulations. This also includes the liquids and or gases in the "seal system" or other utilities.
hazardous substances and toxic fluid
Make sure that hazardous substances or toxic fluids are disposed of safely and that the
correct personal protective equipment is used. The safety specifications must be in
accordance with the current regulations at all times
3 INSTALLATION
NOTE
The installation/commissioning of this equipment must be conducted in according
with API
Recommended
Practicee 686/PIP REIE 686-First Edition.
3.1 Location
Install the unit close to the source of the liquid to be pumped.
explosive atmosphere
Equipment operated in hazardous locations must comply with the relevant explosion
protection regulations.
When selecting the location, be sure to allow adequate space for operation as well as for maintenance operations
involving dismantling and inspections of parts. Headroom is an important consideration as an overhead lift of
some type is required.
3.2 Foundation
NOTE
The following information regarding foundation is only offered as a general
guideline. PUMPIRAN requires that all foundations be designed and installed in
accordance with specifications set forth in Chapter 4, Foundations from API
Recommended Practices 686/PIP REIE 686, First Edition.
