PB3 User Instruction
Page 10 of 39
WARNING
EQUIPMENT
CAPACITY
Make sure that any equipment used to lift the pump or any other of its components is
capable of supporting the total weight encountered. Make sure that all parts are properly
rigged before attempting to lift.
2.3.2 To lift unit
Caution
The complete unit with pump, driver and auxiliary equipment all mounted on the
base plate can NOT be lifted as a unit. Driver must be removed from base plate
before lifting. To lift unit sling base plate from all lifting eyes. Failure to do this may
result in permanent deformation of base plate.
Damage to base plate caused by mishandling or improper setting prior to grouting is
not covered by PUMPIRAN’s warranty
2.3.3 To lift driver
Refer to driver manufacturer’s instructions.
2.3.4 To lift pump
Install sling from overhead hoist and under bearing housing mounting brackets (cast portion of casing where
bearing housings attach).
Proper lifting practice for pump
WARNING
LIFTING PRACTICE
Do not lift entire pump from cast lifting lugs on upper half casings. These lugs are
for lifting upper half casing only.
