40
3. Oil or grease all blank parts and surfaces of the pump (with silicone-free oil and grease,
food-approved if required) to protect them against corrosion.
Observe the additional instructions. ( Section 3.2 Page 13)
If the pump set is to be stored temporarily, only preserve the wetted components made
of low alloy materials. Commercially available preservatives can be used for this purpose.
Observe the manufacturer
,
s instructions for application/removal.
Observe any additional instructions and information provided. ( Section 3 Page13)
6.4 Returning to service after storage
For returning the pump to service observe the sections on commissioning/start-up ( Section
6.1 Page 31) and the operating limits. ( Section 6.2 Page 37)
In addition, carry out all servicing/maintenance operations before returning the pump (set)
to service. ( Section 7 Page 41)
WAR NING
Failure to re-install or re-activate protective devices
Risk of personal injury from moving parts or escaping fluid!
As soon as the work is completed, re-install and/or re-activate any safety-
relevant and protective devices.
NOTE
If the pump has been out of service for more than one year, replace all elastomer seals.
6 Commissioning/Start-up/Shutdown
