PUMP'IN ONE, User Manual

Page: 16 / 18

Maintenance
Clean the compressor using a clean, dry cloth. Do not use cleaning
product. Cleaning should only be done when the compressor is
disconnected from the power supply.
Ensure no dust or dirt will hinder the compressor’s proper functioning
before connecting it.
Checking for correct operation
Start the compressor by following the operating instructions, without
connecting it to the valve.
Check that air comes out of the hose.
Check that the pressure gauge needle moves when the tip of the
hose is briefly obstructed with your finger.
In case of breakdown - Repair
In case of a fall, have the device checked by a qualified service
technician or by the distributor, or discarded it.
Spare parts
Fuse replacement: 15 A
Your compressor comes with an additional fuse. This fuse is located
in the fuse box attached to the power cable. Lift the cover and
remove the non functionning fuse. Replace the fuse with the one
supplied or the same power.
Close the cover of the fuse box
Technical specifications
Power: 12V DC 14A max
Rated power: 0,14KW