background image

6

Terms and Conditions

There is water left around the nozzle

Radio, TV feeling noise

At the beginning of use, the warm 
air may be slightly smell

Saving function

When exposed

Attached to the induction window

Slowly close the toilet seat and cover it

Just sitting in the toilet seat and cleaning process, 
the nozzle may be around the water, which is the 
product in the design needs, not a malfunction.

This product may interfere with the reception of radio and 
television signals. In this case, move the radio and TV to 
an undisturbed location.

This product in the beginning of the use of the use of 
drying function will feel a little smell, and soon after this 
smell will disappear.

The following operations can effectively save energy.
Do not blindly set the temperature of the toilet seat and 
warm water too high,
Should be adjusted to not affect the comfort level is better.
Please combine spring and summer autumn and winter 
temperatures for temperature adjustment.
Try to use the power saving function.
Turn off the power when you are away for a long time.
When freezing is possible, take antifreeze measures.

As the room temperature and toilet seat, cover the 
surface temperature difference or humidity reasons, the 
seat, will cover the surface of the water droplets 
(condensation).To prevent condensation, please fully 
ventilate and wipe with a dry cloth when condensation 
occurs.

The dew will leave traces of the ground or damage the 
ground.

In addition to the above, if there is more than water,
close the water supply angle valve, remove the 
power plug from the outlet, and contact the 
purchased or after-sales service department by 
telephone or fax.

When you do not sit on the toilet seat, even if the 
key press the key, cleaning water will not be ejected, 
because this product is equipped with induction 
window, so do not sit on the toilet seat, the buttocks 
cleaning, female special cleaning, Drying and other 
functions do not work. In addition, when the cover is 
put on the coveror the cover is covered, the 
unsuitable cover will cause the seating sensor 
window to be operated or not to run.

Sitting on the toilet seat when the power outage, 

even if immediately restore the power supply, 

but also the function of hips and other functions 

do not run, then, please get up from the toilet seat, 

1 to 2 seconds and then sit down.

In order to prevent the toilet seat and toilet cover 

suddenly closed, this product has a slow down 

function, so that it can slowly shut down.

Please note that forced shutdown will cause a 

malfunction.

Summary of Contents for US-AS003-X

















Reviews: