8
Installation Notes
Installation step 1
TIPS
You will be used:
Remove the old toilet cover and wipe the
toilet clean. Remove the expanded stud
screw and insert the rubber into the toilet
bowl.
Will be fixed floor, stainless steel regulator,
stainless steel gasket and expansion of the
corresponding column hole in turn put.
Will lock the stainless steel screws, the
initial do not twist too tight, will be fixed
around the bottom of the floor position,
the stainless steel screws tightened,
let it not shaking.
When the main body
cover is separated from
the ceramic, the hands
are held on both sides
of the main body and
lifted upwards, pulled
out and the removal
method is shown.
Be sure to turn off the power and
water before disassembling
When the main body cover is mounted
on the toilet, the other side of the main
body is held in one hand and the other
hand is slowly pushed in parallel until it
is advanced.
Prepare before installation
Please be sure to follow the instructions in the
correct installation, please check the parts before
installation accessories as follows:
Disassembly
method
