18
BATT/PROGRAM
LiPo BATT
LiPo BALANCE
2.0A 11.1V (3S)
LiPo BALANCE
2.0A 11.1V (3S)
LiPo BALANCE
2.0A 11.1V (3S)
LiPo BALANCE
2.0A 11.1V (3S)
START/ENTER
START/ENTER
START/ENTER
START/ENTER
START/ENTER
> 3 Seconds
(1)
A memory profile is available for setting and storing pertinent information for up
to 40 different program sets; each channel can store 10 program. Once a battery
program is stored into memory, it will be retained until changed again manually.
Recalling a program memory number makes the charger instantly ready to go!
(2)
If you do not wish to use the battery program memories, this charger can be man-
ually set before each use.
The following flowchart shows how the program is set manually :
BATT/PROGRAM Select
Press INC and DEC to go through all the programs and press
START/ENTER to enter LiPo BATT Program.
Mode Select
Press INC and DEC to go through all the modes and press
START/ENTER to enter LiPo Balance Charge Mode.
Battery Setting
Press START/ENTER, the present value will start to blink.
Press INC and DEC to change the value and press START/
ENTER to confirm your setting.
At the same time, the battery pack’s cell count will start to
blink, press INC and DEC to change the value and press
START/ ENTER to confirm your setting.
Program Start
Press and hold START/ENTER for 3 seconds to start the
program.
Lithium Battery Program (LiPo/LiFe/LiIon/LiHV)
