17
LiPo
Battery
4.19 4.15 4.18V
4.15 4.19 4.18V
4.19 4.15 4.18V
4.15 4.19 4.18V
LIPO
LIHV
LIFE
LIION
1-6s
NICD
NIMH
PB
2-2Ov
1-15c
CHARGE
O.1-1OA
DISCH.
O.1-2A
POWER
12O W
POWER
1O W
CHARGE
O.1-1OA
DISCH.
O.1-2A
POWER
12O W
POWER
1O W
DC POWER SUPPL
Y
15OW
13.8V
AC/DC
25O
W
BATT/PROG
STOP
- DEC
INC +
ENTER
START
BATT/PROG
STOP
- DEC
INC +
ENTER
START
2
1
MULTI FUNCTION BALANCE CHARGER - DISCHARGER - POWER SUPPLY
3- Connecting the Battery
Important!!! Before connecting a battery it is absolutely essential to check one last time
that you have set the parameters correctly. If the settings are incorrect, the battery may
be damaged, and could even burst into flames or explode. To avoid short circuits be-
tween the banana plugs, always connect the charge leads to the charger first, and only
then to the battery. Reverse the sequence when disconnecting the pack.
4- Balance Socket
It is IMPORTANT for charging Lithium (LiPo, Lilo, LiFe and LiHV) battery in Bal-
ance Charge mode. If you don’t connect the battery to the balance socket while
the charger is working in mentioned mode, the charger won’t start working.
The balance wire attached to the battery must be connected to the charger with the
black wire aligned with the negative marking. Take care to maintain correct polarity!
(See the wiring diagram below.)
This diagram shows the correct way to connect your battery to the charger while charg-
ing.
WARNING:
Failure to connect as shown in this diagram will damage the charger.
To avoid short circuit between the charge lead always connect the charge cable to
the charger first, then connect the battery. Reverse the sequence when discon-
necting.
Operating Program
