PSA7000 Hardware Guide
© 2017 Pulse Secure, LLC. All rights reserved
31
Support for 1G Network:
•
The Network interface card in the PSA7000f is designed for 10G networks, but it can support 1G networks
when used with 1G transceivers at both ends of the network. No manual set up is required. Pulse Secure
does not offer any optional 1G transceiver / cable as an option for sale. Any
supplier’s
short range 1G
transceiver should work.
•
http://www.avagotech.com/products/fiber-optics/optical-transceivers/sfp/abcu-5741rz
The tested and qualified cables details are provided in the table below.
Brand
Length
Finisar (Juniper) transceiver
15 meters
Avago transceiver
15 meters
PSA7000c
This appliance offers dual and redundant 10G network interface ports (4 ports total) in the RJ45 form factor
compatible with category 6 or 6A network cables.
The hardware supports auto-negotiation between 1G and 10G networks over an RJ45 connection. Pulse
secure does not offer any RJ45 cables/accessories as an optional SKU.
Serial Number Placement
The serial number is placed on the bottom left edge of the unit. See the red box in the graphic. When
technicians service the system from the rear of the cabinet, they can scan the barcode easily (especially if the
rackmount unit is at the bottom of the cabinet):
Serial numbers are also displayed in the LCD for the PSA7000.
