PSA7000 Hardware Guide
© 2017 Pulse Secure, LLC. All rights reserved
30
3.
Replace the failed power module with a new unit. To do this, push the new power supply module into
the power bay until you hear a click.
4.
Plug the AC power cord back into the module.
Network Cables
The PSA7000f model offers SFP+ interfaces supporting both 10G fiber and 10G copper networks with a direct
attach transceiver cable.
PSA7000f
This appliance offer dual and redundant 10G network interface ports (4 ports total) in the SFP+ form factor.
Pulse Secure has qualified SFP+/Cable combinations (Short Range, 850 nm) and offers them for sale as an
optional accessory. Check the Price book for the SKUs.
Customers can either purchase this option from Pulse Secure or procure it from their vendor of choice.
Contact your Solutions Engineer or Technical Support for additional information and Technical Specifications.
The performance tests done with Finisar (Juniper) transceiver on the cable end that is connected to the Juniper
switch, and Avago transceiver on the cable end that is connected to the PSA 7000 show no impact on the
throughput using longer cables. The maximum cable length qualified is 15 meters.
Note: The cable included with 10G transceiver will only work with 10G switch port.