© 2017 Pulse Secure, LLC. All rights reserved
28
PSA7000 Hardware Guide
Installing and Removing Hard Drives
The drives (HDD1, HDD2) are labeled on the back of the system.
Removing the Hard Drive Trays from the Chassis
1.
Press the
Release
button on the drive tray. This extends the drive tray handle.
2.
Use the handle to pull the drive out of the chassis.
The drives are mounted in drive carriers to simplify their installation and removal from the chassis. These
carriers also help promote proper airflow for the drive bays.
Warning:
Except for short periods of time (swapping hard drives), do not operate the server with the hard
drives empty. The hard drive tray must have a hard drive or dummy drive installed.
Installing a Hard Drive to the Hard Drive Tray
1.
Slide the drive tray into an empty slot in the chassis.
2.
Close the drive tray handle until it clicks into place.
Note:
Replacing a failed hard drive requires manual configuration steps to be taken in the admin console. See
the Administration Guide for more information at
https://www.pulsesecure.net/techpubs
.
2
1
