Pulse-Eight Binary neo XMR, User Manual

Page: 7 / 40

DESIGNED FOR BINARY BY
PULSE EIGHT
7
IR Receiver and Transmitter Ports : Connect as required
The IR Receiver port (green) can be used to accept and distribute IR signals from a controller using a P8-IR-
Optocable Not required in a Control4 system
The IR Flasher port (blue) is used to control the connected HDMI Source device (STB, Blu-Ray, etc) using
compliant Episode IR Flashers
RS232 Phoenix Ports: Ground = Zero volts TX is the signal coming out of the matrix (from the remote device)
RX is the signal going into a matrix (to the remote device) Note: 33V I/O signal level
Audio Outputs : Analogue, Optical, and Digital Coax options for Audio Breakouts
HDMI IR Input and IR Output connect as required
The Input IR port (green) can be connected to receive and distribute IR signals from a connected compliant
Episode IR Receiver
The IR Output port (blue) is used to control the local connected HDMI Sink device (TV, AVR, etc) using compliant
Episode IR Flashers
Audio Inputs : Optical and Digital Coax options to connect audio-only Source devices
Power Connector is used with the supplied power cord to connect the power
HDBaseT Outputs : Connect the appropriate Cat5e or higher grade cable to each output These cables should
then be connected to a neo Receiver at each Sink device. (TV/Amplifier etc.).
HDMI Inputs : Connect the appropriate high speed HDMI cable to each input These cables should then be
connected to the Source device (Blu-Ray player etc)
Reset : Factory reset - Please use only when instructed by our customer service team
Ethernet : Connect to network - Required for connection to Web Interface, Third Party Control, and Cloud
Remote Monitoring Portal
HDMI Outputs : Connect the appropriate high speed HDMI cable to each output These cables should then be
directly connected to each Sink device. (TV/Amplifier etc.)
COMPATIBLE DEVICE
1 A compatible IR receiver is required when wanting to accept incoming IR signals - for example, from a remote
control - to distribute and control other attached devices remotely Compatible IR receivers are sold separately
Episode Electronics Surface Mount Plasma/LED-Proof
IR Receiver with LED Feedback (EE-IR-RCVR-SM)
Episode Electronic Tabletop Plasma/LED-Proof IR
Sensor with LED Feedback (EE-IR-RCVR-TT)
D
F
E
J
K
L
M
N
G
I
H