DESIGNED FOR BINARY BY
PULSE
EIGHT
32
IR BLASTING
LINKED DEVICE
This feature is only available with Control4
The Designed for Binary product range have the unique IP-to-IR logic inside, allowing it to output infrared
commands (IR blasting) in a Control4 installation without the need for a cable between the EA controller and the
matrix There is no requirement for an IR optocable or complicated setup
As long as the EA controller and the matrix are on the same network, then the driver can easily be configured to
control and manage all video sources and displays flawlessly from your Control4 system through the neo:XMR
matrix
For more information, please refer to the neo:XMR Binary driver and its documentation
Any neo:XMR product can easily be linked with the Pulse-Eight ProAmp8, as part of the Linked Devices option See
Output Setup Options of the Web Management section
This feature offers the ability to control the volume via the neo:XMR (through CEC) instead of going through the
ProAmp8 web UI interface
Make sure both neo:XMR and the ProAmp8 are connected to the local network as the system needs to detect
each other to make the linking possible
Summary of Contents for Binary neo XMR
Page 1: ......
