SandAlert Lite 2
nd
Edition
Page
17
Enter the flow rate
Enter the average particle size, and the system then calculates the calibration factor.
This figure can be modified with choice 3 Edit Factor. Be careful changing the factor as it can
change the weight figure dramatically. It is best to stick with Auto Calibrate unless a known weight
of sand is being produced and the system is calibrated at that time.
Edit Factor Screen, it is not recommended to change the calibration factor unless you are sure it is
necessary and understand the consequences.
4. and 5. File Handling and Event Log are not functional in the Lite software
6.6. Passwords:
