www.pulsar.pl
INTRE
13
5.3 Configuration of power supplies of the EN54 series with LCD display
The PSU fitted with LED display enables setting the communication parameters of the serial port from the
LED panel. To enter the setup mode, simultaneously press t
he „<,>” rightmost and leftmost buttons on the LED
panel.
-
use the „>” or „<” buttons to display the
PSU
menu
-
press the „SET” button
-
use the „>” or „<” buttons to display the
Transmission
menu
(The
Transmission
menu is at the bottom of the screen)
-
press the „SET” button, the prompt will appear at the end of the line
-
use the „>” or „<” buttons to set the
115.2k 8E1
(if the PSU does not support this speed, choose other
maximum speed available)
- confirm by pressing
the „SET” button