The supply cord or switch of this equipment cannot be replaced, and the equipment
shall be disposed of.
Do not use on graveled surface unless the snow mover is adjusted for such a
surface in accordance with the operator’s manual.
Keep Children Away– All visitors should be kept a safe distance from work area.
Dress Properly – Do not wear loose clothing or jewelry. They can be caught in
moving parts.
Wear rubber boots when operating the snow mover.
Operation of the snow mover in the hand-held position is unsafe, except in accordance
with the special instructions for such use provided in the operator’s manual.
Warning – To prevent electric shock use only with an extension cord suitable for
outdoor use.(Does not apply to battery-operated snow movers.)
Avoid Accidental Starting– Don’t carry plugged-in snow mover with finger on switch.
Be sure switch is off when plugging in.
If cord is damaged in any manner while plugged in, pull extension cord from wall
receptacle.
Don’t Abuse Cord– Never carry snow mover by cord or yank it to disconnect from
receptacle. Keep cord from heat, oil, and sharp edges. (Does not apply to batteryoperated
snow movers.)
Keep hands away from moving parts.
Keep guards in place and in working order.
Don’t Force Snow Mover – It will perform better and safer at the rate for which it
was designed.
Don’t Overreach – Keep proper footing and balance at all times.
Disconnect Snow Mover– Disconnect the snow mover from the power supply when
not in use, before servicing, when changing accessories, and the like.
Store Idle Snow Movers Indoors – When not in use, snow movers should be stored
indoors in dry, locked-up place – out of reach of children.
Maintain Snow Movers with Care – Follow instructions for lubricating and changing
accessories.
If the snow mover strikes a foreign object follow these steps:
Stop snow mover. Release the switch.
Unplug power cord.
Inspect for damage.
Repair any damage before restarting and operating the snow mover.
Extension Cords – To prevent disconnection of snow mover cord from the extension
cord during operation,
Make a knot or
Use one of the plug-receptacle retaining straps or connectors described in
this manual.
7
ADDITIONAL SAFETY RULES FOR SNOW THROWER
CAUTION
Inspect wiring, which, if damaged during shipping, may cause serious bodily injury during
equipment use.
Handle with care during assembly so that electrical wiring does not become damaged.
PRODUCT LABELS
WARNING - Read, understand and follow all safety labels and markngs on the unit.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 8 minutes
Tools required for assembly : Phillips screwdriver and 7 mm two-sided open-end wrench
PREPARATION
SAFETY INFORMATION
8
PRODUCT SPECIFICATIONS
SPECIFICATIONS
Voltage: 120 V, 60 Hz
Input power: 13 Amp
Rotation speed: 2,200 RPM
Plow width and depth: Approx. 46 cm x 23 cm (18 in. x 9 in.)
Max. spraying distance: 8 m (26 ft.)
Net weight: 16kg (35 lbs.)
