Pulsar PSBEN 5012C, Manual, Page: 8 / 20

www.pulsar.pl PSBEN5012C
8
Table 3. A description of the buttons and LEDs of the LED panel.
- parameter selection
- selection approval
- red LED – indicates presence of the AC voltage
- red LED – indicates overload of the PSU
- red LED – indicates failure of the PSU
- red LED – indicates battery failure
- green LED – indicates power at the AUX output of the PSU
- three yellow LEDs – indicate battery charging level
Fig. 5. Menu of the display.
•
FLt -
PSU fault memo (30 last events)
•
Io - AUX
output current measurement
[A]
•
Uo - AUX
output voltage measurement
[V]
Resolution for voltage measurement amounts to 0.1V, for current measurement: 0.1A. Displayed
voltage and current rates are only approximate. For higher accuracy, a multimeter shall be used.