Pulsar PSBEN 10A12C, Manual

Page: 16 / 34

www.pulsar.pl PSBEN10A12C
BLACK POWER
16
Table 7. List of PSU failure codes.
Failure
code
Information
Technical
output
activation
Additional information
Additional
information
F01 AC power fail! EPS FLT
- No AC mains supply
- F
MAINS
fuse failure
F02 AUX fuse fail! PSU FLT
- Blown F
AUX
fuse
- AUX output overload
F03 BAT fuse fail! APS FLT
- Blown F
BAT
fuse
- Short circuit in the battery circuit
- Short circuit in the AUX output circuit
F04 Output overload! PSU FLT - PSU overload Section 5.9
F05 Battery fail! APS FLT
- Worn out battery
- Undercharged battery
- Battery not connected Section 5.5
Section 6
F06 High AUX voltage! PSU FLT - Output voltage over 14.7V
F07 High battery voltage! PSU FLT - Battery voltage >14V
F08 Charge circuit fail! PSU FLT
- The output voltage of the PSU set too low ,
below 13V
- Battery charging circuit failure
F09 Low AUX voltage! PSU FLT
- Output voltage below 11,8V
(during buffer operation)
F10 Low battery voltage! APS FLT
- the battery voltage has dropped below
11,5V (during battery-assisted operation)
F11
Low battery volt.
–
off!
APS FLT
- the battery voltage has dropped below 10V
(during battery-assisted operation)
F12 External input EXTi!
- Activation of the input of collective failure
EXT IN Section 5.6
F13 PSU cover opened! PSU FLT
F50-F54 Internal supply fail! PSU FLT - service codes
F60
No communication PSU FLT - no communication with LCD panel
F61-F64 Control panel fail PSU FLT - service codes
F65 Access unlocked - passwords unlocked
Table 8. List of PSU message codes.
Message
code
Description
I00 Power supply start-up
I01 AC power back
I02 AUX fuse replaced
I03 BAT fuse replaced
I04 Battery OK
I05 Battery test
– START
I06 PSU cover closed
Table 9. Optical indication of failure with the PSU LED on the PCB of the PSU.
The number of
flashes of the PSU
LED on the PCB of
the power supply
Failure
code
Failure description
1 F06 High AUX voltage!
2 F07 High battery voltage!
3 F08 Charge circuit fail!
4 F09 Low AUX voltage!
5 F50-F54
F60
Internal supply fail!
No communication
6
F13 PSU cover opened!