www.pulsar.pl POE1648C
5
W
H
D
Electrical parameters (Table 3).
Mains supply
176÷264V AC
Current consumption
1,5A@230V AC type
PSU’s power
270W max.
Efficiency
85%
Output voltage
44V
÷ 54V DC – buffer operation
37V
÷ 54V DC – battery operation
The adjustment range of the output voltage
48÷56V DC
Output current t
AMB
<30°C
16 x 0,3A + 0,5A battery charge
– see diagram 1
Output current t
AMB
=40°C
16 x 0,2A + 0,5A battery charge
– see diagram 1
Ripple voltage
150 mV p-p max.
PSU current consumption
150mA
Battery charging current
0,5A
Short-circuit protection SCP
105%
÷ 150% of PSU power, electronic current limiting
Overload protection OLP
105% ÷ 150% of PSU power, electronic current limiting
Battery circuit protection SCP and reverse
polarity connection
melting fuse
Overvoltage protection OVP
>62V (activation requires disconnecting the load or supply for
about 20 s.)
Deep discharge battery protection UVP
U<38
V (± 5%) – disconnecting the battery terminal
Surge protection
varistor
Antisabotage protection:
- TAMPER output indicating enclosure opening
- microswitch, NC contacts (enclosure closed),
0,5A@50V DC (max.)
Optical indication of operation:
YES
– LED lights
Mechanical parameters (Table 4).
Enclosure dimensions
420 x 373 x 181+14 mm (WxHxD)
Mounting
See Fig. 3
Battery housing:
4x17Ah/12V (SLA) max.
415x170x170mm (WxHxD) max
Net weight
7,70kg / 8,30kg
Enclosure
DC01 steel plate, 1,0mm, RAL 9003
Closing
Cylindrical screw x 2 (at the front), lock assembly possible
Terminals
Switch mode power supply:
Φ0,4-2,5 (AWG 26-10)
LAN/PoE outputs 1...16: RJ45 8pin
TAMPER output: Φ0,8
Notes
The enclosure has a 14mm distance from the mounting surface so the cables can
be led.
Forced cooling
– fan.
Safety of use (Table 5).
Protection class PN-EN 60950-1:2007
I (first)
Protection grade PN-EN 60529: 2002 (U)
IP20
Insulation electrical strength:
- between input (network) circuit and the output circuits of the PSU (I/P-O/P)
- between input circuit and PE protection circuit (I/P-FG)
- between output circuit and PE protection circuit (O/P-FG)
3000 V/AC min.
1500 V/AC min.
500 V/AC min.
Insulation resistance:
- between input circuit and output or protection circuit
10
0 MΩ, 500V/DC
Operation parameters (Table 6).
Operating temperature
-
10ºC...+40ºC (see Figure1)
Storing temperature
-
20ºC...+60ºC
Relative humidity
20%...90%, no condensation
Vibrations during operation
unacceptable
Surges during operation
unacceptable
Direct insolation
unacceptable
Vibrations and surges during transport
According to the PN-83/T-42106 standard