Pulsar POE1648C, Manual, Page: 4 / 8

www.pulsar.pl POE1648C
4
Fig. 2. Components arrangement.
Fig. 3. The view of the PSU.
Component No.
[Fig. 3]
Description
[1] The module of the switch mode PSU
[2]
L-N power-supply connector 230V AC, PE protection connector
[3] LED light indicating correct operation of the switch mode PSU
[4] ADJ potentiometer
– regulation of the power supply output voltage
[5] PoE module
[6]
Connectors for connecting the batteries: +BAT = red, - BAT = black
[7] TAMPER
– microswitch (contacts) of antisabotage protection
(NC)
Tab. 2. Components of the PSU (see Fig. 3).
1.4 Technical parameters.
- electrical parameters (Table 3)
- mechanical parameters (Table 4)
- safety of use (Table 5)
- operation parameters (Table 6)