Pulsar MicroFlow-i, Instruction Manual, Page: 48 / 56

Page
42
Minimum Flow
Cut Off
120 10-4000 150
In units of mm/s velocity for
user input, to set the
minimum flow velocity
present.
Response 125
0=Instant
1=Moderate
2=Damped
Instant
Changing this to ‘Instant’
will automatically calibrate
parameters in the sensor to
track measurements faster.
This is recommended for
Pumped flow. ‘Damped’ is
recommended when there is
natural flow, as
measurements will be
tracked at a slower pace.
Multipoint
Calibration @
0.2 m/s
152 5 - 500 100
In percentage terms, default
is 100, for 100%. 50%
would half and 200% would
double.
Multipoint
Calibration @
0.4 m/s
153 5 - 500 100
In percentage terms, default
is 100, for 100%. 50%
would half and 200% would
double.
Multipoint
Calibration @
0.8 m/s
154 5 - 500 100
In percentage terms, default
is 100, for 100%. 50%
would half and 200% would
double.
Multipoint
Calibration @
1.5 m/s
155 5 - 500 100
In percentage terms, default
is 100, for 100%. 50%
would half and 200% would
double.
Multipoint
Calibration @
3.0 m/s
156 5 - 500 100
In percentage terms, default
is 100, for 100%. 50%
would half and 200% would
double.
Multipoint
Calibration @
5.0 m/s
157 5 - 500 100
In percentage terms, default
is 100, for 100%. 50%
would half and 200% would
double.
Multipoint
calibration
mode
158
0 = Off
1 = On
Off
Turns Multipoint calibration
on and off.