Pulsar MicroFlow-i, Instruction Manual

Page: 46 / 56

Page
40
Chapter 6 Parameter Listing and Descriptions
Parameter Access
All of the MicroFlow-i parameters have factory default values which the user
receives upon first use, or when the sensor is reset. The parameters consist of two
main types: Device information and Processing parameters.
Device parameters are read only and cannot be set by the user, such as the serial
number of the sensor. Processing parameters can be queried and set, there is also
an associated access level required for setting, either ‘User’ or ‘Service’. Upon
connection to a
MicroFlow-i
, the access level is defaulted to ‘User’.
The parameters are always stored and entered as whole numbers, please refer to
the individual parameter for its individual value range.
Device Information Parameters
These parameters are read-only.
Name Parameter
No.
Description
Serial Number
240
&
241
Registers 240 & 241 form a 32-bit number.
Register 240 = Most significant 16-bit.
Register 241 = Least significant 16-bit.
Firmware ID 261
A number associated with the version of
firmware that is currently programmed onto the
sensor.
Hardware ID 262
A number associated with the version of
hardware that is currently used with the sensor.