Pulsar Krypton XG, Manual

Page: 23 / 72

Powering on and Image Setting
☐
Show device diagram
1. Remove the lens cover (1) by turning it counterclockwise.
2. Press the ON/OFF (9)button to turn on the thermal imager.
3. Adjust the eyepiece dioptre ring of your daylight optical device until the symbols in the
display are sharp. In future, it will not be necessary to adjust the eyepiece dioptre,
regardless of the distance and other conditions.
4. Rotate the lens focus knob (10) to focus on the visual target.
5. Enter the main menu with a long press of the MENU (7) button and select the desired
calibration mode : manual (M), semi-automatic (SA) or automatic (A).
6. Calibrate the image by briefly pressing the ON/OFF (9)button. Close the lens cover
when calibrating manually.
7. Select the desired observation mode (Forest, Rocks, Identification or User) by briefly
pressing the MODE (8) button or in the main menu. User mode allows you to configure
and save custom brightness and contrast settings, as well as one of three modes as a
base.