Pulsar Krypton XG, Manual

Page: 12 / 72

When the indicator is continuously green, the battery is fully charged. Disconnect the
charger from the mains and disconnect the battery from the charger.
If the battery charger indicator is constantly red when the battery is inserted, the charge
level is probably below the permissible level (the battery has been in a discharged state
for a long period of time). Leave the battery in the charger for a long period of time (up to
several hours), then remove and reinsert.
If the indicator begins to flash green, the battery is good.
If it continues to show red, the battery is defective. Do not use this battery!
The LED indicator will display the battery charge status:
LED Indicator Battery Charge Status
Battery is empty
Image not found or type unknown
Battery is full
Step 3. ?onnect the charger to the mains supply
1. Attach the microUSB plug of the USB cable (23) to the microUSB connector (22) on the
charger.
2. Connect the USB plug on the cable(23) to the power adapter (24).
3. Plug the power adapter(24) into a 100-240V (25) socket.
4. When the indicator is continuously green, the battery is fully charged. Disconnect the
charger from the mains.