www.pulsar.pl
INTRE
8
Fig. 6. The window of network settings.
.
In the settings window, select the „Manually configure network settings” option. From now on, the
automatically assigned IP address will maintain the same on each connection; it may be left unchanged or
changed. If changed, make sure that the new address is not already taken and there is no IP address conflict.
Before setting the network IP address, make sure it is not used by any device on the network and will
not cause conflicts.
Confirm the changes by pressing the „Save” button. The ” Digi Device Discovery” application will display
the message about the need to restart the interface, which should be confirmed by pressing "OK”. A reset progress
window will be displayed.
4.5 STEP 3 – Configuring the RS485-Ethernet interface – login.
To configure the RS485-Ethernet interface, double-click on the line of the selected interface in the „Digi
Device Discovery” program. Log in correctly once the default web browser window is opened.
Fig. 7. The login window of the RS485-Ethernet interface.
Login parameters:
Username:
root
Password:
dbps
Confirm by pressing the „Login” button. The adjustment window will be displayed.
The web browser interface requires re-login after 5 minutes of inactivity.