Pulsar INTE, Instruction

Page: 14 / 20

www.pulsar.pl INTE
14
5.4 Configuration of power supplies of EN54 series with LED display
The PSU is fitted with LED display, which enables setting the communication parameters of the
serial port from the LED panel. To enter the setup mode, simultaneously press the „<,>” rightmost and
leftmost buttons on the LED panel.
5.4.1 Setting the transmission speed
- simultaneously press the „<,>” rightmost and leftmost buttons
- The „tSt” parameter will be displayed
- use the „<” or „>” buttons in order to display the „trS” parameter
- press „OK”
- The information about the transmission speed will be displayed
- use the „<” or „>” buttons in order to set the required transmission speed,
- 9.6k
:
- 115.2k
(factory setting)
- confirm by pressing „OK”
- in order to return to the main menu, simultaneously press the „<,>” rightmost
and leftmost buttons