Pulsar INTE, Instruction

Page: 13 / 20

www.pulsar.pl INTE
13
5.3 Configuration of power supplies of EN54 series with LCD display
The power supplies of the EN54 series allow higher transmission speed, and therefore
instead of 19.2k 8E1 it can be set to 115.2k 8E1. The changed values apply to all settings
The PSU is fitted with LCD display, which enables setting the communication parameters of the
serial port from the LCD panel. To enter the setup mode, press the „SET” button from the main screen.
- use the „>” or „<” buttons to display the
PSU menu
- press the „SET” button
- use the „>” or „<” buttons to display the
Transmission menu
(The Transmission menu is at the bottom of the screen)
- press the „SET” button, the prompt will appear at the end of the line
- use the „>” or „<” buttons to set the
19.2k 8E1
- confirm by pressing the "SET" button