www.pulsar.pl HPSBOC5012C
2
Features:
•
DC 13,8V/10A uninterruptible power supply
•
fitting battery: 17Ah/12V
•
wide range of mains supply: 176÷264V
•
high efficiency 83%
•
battery charging and maintenance control
•
excessive discharging (UVP) protection
•
jumper selectable battery charge current 1A/4A
•
battery output full protection against short-circuit
and reverse polarity connection
•
LED indication
•
FAC technical output indicating AC power loss
•
FPS technical output indicating PSU failure
•
FLB technical output indicating battery low
voltage
•
protections:
•
SCP short-circuit protection
•
OVP overvoltage protection
•
overvoltage protection
•
against sabotage
•
overload protection (OLP)
•
warranty – 3 year from the production date
CONTENTS:
1. Technical description.
1.1 General description
1.2 Block diagram
1.3 Description of PSU components and connectors.
1.4 Specifications
2. Installation.
2.1 Requirements
2.2 Installation procedure
3. Operating status indication.
3.1 LED indication of operating status
3.2 Technical outputs
4. Operation and use.
4.1 Overload or short circuit of the PSU output (SCP on)
4.2
Battery-assisted operation
4.3 Maintenance
1. Technical description.
1.1 General description.
A buffer PSU is intended for an uninterrupted supply to devices requiring stabilised voltage of 12 V DC
(+/-15%). The PSU provides voltage of U=13,8 V DC. Current efficiency:
1. Output current 10A + 1A battery charge
2. Output current 7A + 4A battery charge
Total device c battery: 11A max.
In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the
switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which
can accommodate a 17Ah/12V battery. A micro switch indicates door opening (front cover).
OPTIONAL POWER SUPPLY CONFIGURATIONS:
(visualisation available at:
www.pulsar.pl)
BATTERY 17Ah:
1. Buffer power supply unit HPSBOC 13,8V/4x2/17Ah.
- HPSBOC LB4 4x2A (AWZ576) + 17Ah
2. Buffer power supply unit HPSBOC 13,8V/8x1A/17Ah.
- HPSBOC LB8 8x1A (AWZ579 or AWZ580) + 17Ah
3. Buffer power supply unit HPSBOC 13,8V/2x12V/10A/17Ah.
- HPSBOC 2 x RN500 (13,8V/12V) + 17 Ah
4. Buffer power supply unit HPSBOC 13,8V/12V/4x1A/17Ah.
- HPSBOC RN500(13,8V/12V) + LB4 4x1A (AWZ575 or AWZ576) + 17Ah
5. Buffer power supply unit HPSBOC 13,8V/(5V÷7,4V)/2A/17Ah.
- HPSBOC DCDC20 (5V÷7,4V/2A) + 17Ah
