www.pulsar.pl HPSB2548C
GREEN POWER
5
W
H
D
- AUX diode indicating DC 27,6V power status at
the switch mode PSU output
- green, normal status
– on, failure: off
Mechanical parameters (tab. 3)
Enclosure dimensions
400 x 350 x 90 x8 [mm] (WxHxD)
Fixation
See figure 2
Fitting battery
2x17Ah/12V (SLA) max.
370 x 170 x 85mm (WxHxD) max
Net/gross weight
3,60 / 3,90 kg
Enclosure
Steel plate DC01, thickness: 0,7mm, colour: RAL 9003
Closing
Cheese screw x 2 (at the front), (lock assembly possible)
Connectors
Power-supply:
Φ0,63-2,50 (AWG 22-10)
Outputs: Φ0,63-2,50 (AWG 22-10)
Battery output BAT: 6,3F-2,5
TAMPER output: wires, 30cm
Notes
The enclosure does not touch the assembly surface so that cables can be led.
Convectional cooling.
Operation safety (tab.4)
Protection class PN-EN 60950-1:2007
I (first)
Protection grade PN-EN 60529: 2002 (U)
IP20
Electrical strength of insulation:
- between input input and output circuits of the PSU (I/P-O/P)
- between input circuit and PE protection circuit (I/P-FG)
- between output circuit and PE protection circuit (O/P-FG)
3000 V/AC min.
1500 V/AC min.
500 V/AC min.
Insulation resistance:
- between input circuit and output or protection circuit
100 MΩ, 500V/DC
Operating parameters (tab.5)
Environmental class
II
Operating temperature
-
10ºC...+40ºC (see: chart 1)
Storage temperature
-20
ºC...+60ºC
Relative humidity
20%...90%, without condensation
Vibrations during operation
unacceptable
Impulse waves during operation
unacceptable
Direct insulation
unacceptable
Vibrations and impulse waves during transport
According to PN-83/T-42106
Chart 1. Acceptable output current from the PSU depending on ambient temperature.
