www.pulsar.pl POE084824B
GREEN POWER CCTV PoE
5
W
H
D
[6]
TAMPER
– microswitch (contacts) of antisabotage protection
(NC)
[7]
Plate for mounting the network switch (Ethernet switch / hub)
Tab. 2. Components of the PSU (see Fig. 3).
1.4 Technical parameters.
- electrical parameters (Table 3)
- mechanical parameters (Table 4)
- safety of use (Table 5)
- operation parameters (Table 6)
Electrical parameters (Table 3).
Mains supply
88÷264V AC
Current consumption
1,5A@230V AC typ.
PSU’s power
140,3W max.
Efficiency
84%
Output voltage
44V
÷ 54V DC – buffer operation
37V
÷ 54V DC – battery operation
The adjustment range of the output voltage
48÷58V DC
Output current t
AMB
<30°C
8 x 0,3A
– see diagram 1
Output current t
AMB
=40°C
8 x 0,21A
– see diagram 1
Ripple voltage
240 mV p-p max.
Battery charging current
0,16A
Current consumption by the PSU
0,2A max. @ 4x7Ah (± 5%)
Short-circuit protection SCP
PoE MODULE
8 x F 0,5A or 8 x PTC 0,5A (jumper selectable)
PSU MODULE
105% ÷ 150% of PSU power, electronic current limiting
Overload protection OLP
105% ÷ 150% of PSU power, electronic current limiting
Battery circuit protection SCP and reverse
polarity connection
melting fuse
Overvoltage protection OVP
62,1÷72,9V DC
Deep discharge battery protection UVP
U<37
V (± 5%) – disconnecting the battery terminal
Surge protection
8 x varistor
Antisabotage protection:
- TAMPER output indicating enclosure opening
- microswitch, NC contacts (enclosure closed),
0,5A@50V DC (max.)
Optical indication of operation:
YES
– LED lights
Technical outputs:
- FPS technical output indicating output fuse
activation
- OC type, 50mA max.
Normal operation: L state (0V),
failure: H state (hi-Z), (automatic return once the normal
operation is restored)
- relay type: 1A@ 30VDC/50VAC, delay time: approximately
10 seconds
F1 ÷ F8 fuses
F 0,5A or PTC 0,5A
Mechanical parameters (Table 4).
Enclosure dimensions
300 x 407 x 126 mm (WxHxD)
Mounting
See Fig. 3
Battery housing:
4x7Ah/12V (SLA) max.
250x165x105mm (WxHxD) max
Net weight
5,1kg / 5,4kg
Enclosure
DC01 steel plate, 1,0mm, RAL 9003
Closing
Cylindrical screw x 2 (at the front) lock assembly possible
Terminals
Switch mode power supply:
Φ0,4-2,5 (AWG 26-10)
PoE module: Φ0,5-2,1 (AWG 24-12)
AUX1...8 outputs: RJ45 8pin
TAMPER output: Φ0,8
Notes
The enclosure has a 15mm distance from the mounting surface so the cables can
be led.
