21
MAINTENANCE
Air Filter
•
To clean, remove the screws then remove outer casing.
•
•
Remove the foam element.
•
Wash the foam element in solvent and let dry.
•
Pour a small amount of oil on the foam element then squeeze out, but do not
wring out, excess oil. Foam element should be damp, but not dripping.
•
Do not run the generator without reinstalling the foam element or excessive piston and
cylinder wear may result.
CAUTION!
•
•
Remove screws, then remove the muffler cover as shown.
•
.
•
•
•
•
•
Install the outer casing and tighten the screws.
•
•
Allow hot components to cool before touching.
WARNING!
Avoid contacting hot areas of this unit.
O
IL
Check the muffler screen and spark arrester for damage.
If damaged replace with PULSAR replacement parts
