ENGLISH
Cover adapter
model
The internal diameter of the insert needs to match the
outer diameter of the objective lens housing of the
daylight riflescope it is being installed on.
Insert internal
diameter, mm
Suitable for lens housing of daylight
riflescopes with an outer diameter of, mm
Cover adapter FN
50mm
51.6
51.6
53.4
53.4
55
54.7-55.6
56
55.7-56.6
57
56.7-57.6
58
57.7-58.6
59
58.7-59.6
Cover adapter FN
56mm
60
59.7-60.6
61
60.7-61.6
62
61.7-62.6
63
62.7-63.6
64
63.7-64.6
65
64.7-65.6
Powering On and Image Setup
•
Remove the lens cover
(1)
by turning it counterclockwise.
•
Turn on the attachment by pressing the
ON
(9)
button. An image will appear
on the display after a few seconds.
•
If necessary, adjust the reticle sharpness according to the instructions for
your scope.
•
Rotate the lens focus knob
(10)
to focus on the visual target.
•
Basic settings (brightness and contrast adjustment) can be altered by using
the quick access menu.
•
Enter the quick menu with a short press of the
M (7)
button.
•
A short press of the
M (7)
button enables you to switch between functions, as
described below.
- Brightness
– by pressing the
RIGHT
(6)
and
LEFT
(8)
buttons and
changing the display brightness value from 0 to 20.
- Contrast
– by pressing the
RIGHT
(6)
and
LEFT
(8)
buttons
and changing the display contrast value from 0 to 20.
•
Power the attachment off after use with a long press of the
ON
(9)
button.
“SumLight™” Function
The SumLight™ function substantially increases the sensitivity of the CMOS
array in the event of a reduction in the light level, thus enabling observation in
conditions of low light without using the IR illuminator.
•
To activate the SumLight™ function, press briefly the
LEFT
(8)
button.
•
Press the
LEFT
button
(8)
once more to switch off.
•
The SumLight™ icon (on or off ) is displayed in the status bar.
7
