www.pulsar.pl EN54C-LCD
RED POWER plus
22
7.4.
Information displayed on LCD panel.
7.4.1. Preview menu.
Pressing „ESC” button at bottom of display starts preview menu, allowing to choose one of four available
PSU screens..
Use „<” or „>” buttons to choose a proper screen and press „SET” button to confirm.
– current parameters of PSU
(see section 7.4.2)
– current failures of PSU
(see section 7.4.3)
– event log
(see section 7.4.5)
7.4.2. LCD screen
– current parameters
To set screen, press „ESC” button, use „<” or „>” buttons to choose icon and press „SET” button to confirm.
Screen displays electrical parameters and status of technical outputs during operation. Illumination of an
element informs about an activation and reflects status of LEDs on PCB of PSU (see Table1, [4])..
The fields marked as EPS and ALARM show the current position of the relay contacts on technical outputs
.
Fig. 17. LCD panel
– PSU parameters.