DIGITAL ZOOM FUNCTION
11
This function allows you to control the unit's
ZOOM
mode. The display
shows the full magnification value which is the sum of the optical and
digital magnification.
You can use the
ZOOM
function only in
VIDEO
and
PHOTO
modes.
To activate the zoom, briefly press the
ZOOM (7)
button.
Cycle through the available full magnification options by briefly
pressing the
ZOOM
button:
6.5x>13x>6.5x
.
Setting retention
. The digital zoom value is retained only during the
current session.
When the unit is next switched on, the full magnification value reverts
to 6.5x.
BUILT-IN IR ILLUMINATOR
12
The unit is equipped with a built-in IR Illuminator with a wavelength of
810 nm.
You can control the IR Illuminator in the
VIDEO
and
PHOTO
modes.
To activate the Illuminator, briefly press the
IR (5)
button.
IR Illuminator power level indication.
When the IR Illuminator is set
to position IR1; IR2; IR3 the display shows the corresponding icons
14
13
About device
This menu option shows the following service information about your
device:
Name:
Digiforce 860RT
(
name of the unit
)
SKU:
78093
(
model number
)
Serial:
70119307
(
serial number
)
SW:
12.34.567.A
(
software version
)
HW:
MNV001
(
hardware version
)
To switch between IR power levels, successively press the IR button
to cycle through the available options: IR1->IR2->IR3 ->IR1…
To switch off the IR Illuminator, hold down the
IR
button. The icon is
not displayed.
The IR Illuminator power level is not saved.
You cannot control the IR Illuminator when operating the unit in
REVIEW
mode.
Upon activation of
REVIEW
mode, the IR Illuminator switches off, the
power level is saved, and the icon is not shown on the display.
Upon exiting
REVIEW
mode, the IR Illuminator reverts to the power
level selected before deactivation, with the corresponding icon
shown on the display.
DISPLAY OFF FUNCTION
13
This function deactivates the display, which allows you to eliminate light
exposure caused by the glowing display.
You can operate the
DISPLAY OFF
function in two modes:
VIDEO
and
PHOTO
.
To turn the display off, press and hold down the
ON (
4
)
button for more
than a second.
The message
DISPLAY OFF
appears on the black display.
To activate the display, press and hold down the
ON
button for more
than a second.
When the DISPLAY OFF function is activated:
All controls are inactive (except for the ON button).
Video recording continues (if video was recording before activating
the
DISPLAY OFF
function).
The Wi-Fi function keeps running.
The DISPLAY OFF function deactivates when:
The
ON (
4
)
button is briefly pressed.
The unit is connected to a
PC
via the
USB
port or to an external
portable power supply (in this case the display should activate and
the unit switches to operating mode).
USB CONNECTION
14
The unit can be connected to a
PC
via the
USB
port
(11)
. The
PC
will
detect the unit automatically, no driver installation is necessary.
Connection options.
When the activated unit is connected to a
PC
via the
USB
port
(11)
, one
of the following connection options is selected:
USB Mass storage device
If this option is selected, the unit is detected by the PC as a flash card.
The unit switches to USB power.
This option is designed for use when working with files saved in the
unit's memory. In this mode the unit's functions are not available and
the unit is "off".
