22
21
13
The status bar is located in the lower part of the display and shows
information on the actual operating status of the device, including:
16x
12:30AM
A
1
2
3
4
5
7
6
(
1
)
Colour palette
(shown only if the
“Black Hot”
palette is selected)
(
2
)
Operating mode
(
3
)
Calibration mode
(
in the automatic calibration mode, three seconds before automatic
calibration a countdown timer 00:01 is shown in place of the calibration
mode icon
).
(4)
Current full magnification
(
for
example
, 16
x
)
(
5
)
Wi-Fi connection
status
(6)
Running time
(7)
Battery charge level
(if the device is powered by the Battery Pack)
or
External battery power indicator
(if the device is powered by an external power supply)
STATUS BAR
BUILT-IN LASER RANGEFINDER
The binoculars are equipped with a built-in rangefinder
(9)
, allowing
you to measure distance to objects up to 1000m away.
How the rangefinder works:
џ
Turn on the device, set up image according to section "Operation",
press the
UP (2)
or
LRF (21)
button on remote control - rangefinding
reticle appears; in the top right corner of the display dashes of
distance values with unit of measurement appear, i.e. the rangefinder
enters the stand-by mode.
џ
If PiP mode is activated, the aiming reticle disappers upon
activation of the rangefinder and the PiP window remains active.
џ
Point the rangefinding reticle at an object and press the
"UP"
button.
џ
In the top right corner of the display you will see distance in metres
(or yards - depending on settings).
Note:
if the rangefinder is idle longer than for three seconds, it turns
off automatically.
14
The built-in recorder operates in two modes -
VIDEO
and
PHOTO.
VIDEO mode. Video recording
The device in the VIDEO mode upon turning on.
In the top left corner you will see icon and remaining recording
time
2:12.
in the format HH:MM (hours: minutes)
Start video recording with a short press of the
REC (4)
button.
Upon start of video recording icon disappears, and icon
REC
and
recording timer in the format MM:SS (minutes : seconds) appear
instead:
REC 00:25
VIDEO RECORDING AND PHOTOGRAPHY
Accolade LRF
thermal imaging binoculars feature video recording and
photography of the image being ranged to the internal memory card.
Before using this feature, please read the menu options
“Date setup”
,
“Time setup”
of the section
“Main menu functions”
.
џ
Accuracy of measurement and maximum range depend on the
reflection ratio of the target surface, the angle at which the emitting
beam falls on the target surface and environmental conditions.
Reflectivity is also affected by surface texture, colour, size and shape
of
the target. A shiny or brightly coloured surface is normally more
reflective than a dark surface.
џ
Measuring range to a small sized target is more difficult than to a
large sized target.
џ
Accuracy of measurement can also be affected by light conditions,
fog, haze, rain, snow etc. Ranging performance can degrade in bright
conditions orwhen ranging towards the sun.
Peculiarities of operation
Operation in SCAN mode:
џ
To measure distance in scanning mode, hold down the
UP (2)
or
LRF (21)
button on remote control for longer then two seconds.
Measurement readings will be changing in real time as you point the
binoculars at different objects. Message
SCAN
appears in the top right
corner.
џ
To exit
SCAN
mode, press
UP
or
LRF
(RC) button again.
џ
If measurement fails, dashes will appear on the display.
џ
In 3-4 seconds of inactivity (no measurement is taken) the
rangefinder turns off, the rangefinding reticle with readings disappears
from the display.
Notes:
џ
To select a rangefinding reticle, please go to the respective menu
option.
џ
To select a unit of measurement (metres or yards) go to
"Settings".
Summary of Contents for Accolade LRF XQ38
Page 1: ...www pulsar nv com ACCOLADE LRF Thermal Imaging Binoculars ...
Page 92: ......
