Pulsar 77428, Manual

Page: 26 / 52

Quick Menu Functions
The basic settings (adjusting brightness and contrast, using the Smooth Digital Zoom) can be
changed using the quick access menu.
Enter the menu by briefly pressing the MENU (3).
A short press of the ?ENU (3) button enables you to toggle between functions, as
described below.
Brightness – press the UP (4) / DOWN (2) buttons to change display brightness from 0
to 20.
Contrast – press the UP (4) / DOWN (2) buttons to change image contrast from 0 to 20.
Note: display brightness and contrast settings are saved in the memory when the device
is turned off.
Base Mode – allows you to select one of the three other observation modes
(Forest, Rocks, Identification) as the base for the User mode.
Smooth Digital Zoom – press the UP (4) / DOWN (2) button to change the value of the
digital zoom from 3.5 to 14. The digital zoom changes in 0.1 increments.
Press and hold the MENU (3) button to exit the menu or wait for 10 seconds to exit
automatically.
To see the button operation scheme click here .