G
H
I
x=95
y=99
=
Press
briefly
М
to confirm
.
=
Message
«Memory card formatting»
means
that formatting is in progress.
=
With a short press of the
UP
/
DOWN
buttons
select
«Yes»
to format the memory card or
«No»
to return to the submenu.
=
Enter the Format submenu with a short press of
the
M
button.
=
Confirm selection with a short press of the
M
button.
=
If
«Yes»
is selected, display will show
«Do you
want to format memory card?»
and
«Yes»
and
«No»
options. Select
«Yes»
to format the
memory card.
=
Upon completion of formatting the message
«Formatting completed»
is shown.
=
If
«No»
is selected, formatting is aborted and you
return to the submenu.
Remote
Control
Remote control activation
(bought separately)
Before operating the remote control (RC),
remember to activate it as follows:
=
Display shows message «
Wait»
and
countdown
starts (30 sec), within which hold down for two
seconds any RC button.
ACCOLADE
thermal binoculars allow the user to
repair defective pixels on the detector using a
software-based method or to abort deletion.
When operating a thermal imager, defective (dead)
pixels (bright or dark dots with constant brightness)
may become visible on the sensor.
Defective pixel repair
Defective
pixel repair
=
Select option «
» with the
UP
Defective pixel repair
(2)/DOWN (5)
buttons
.
Press
briefly
М
to confirm
.
=
Switch the direction of the marker from horizontal
to vertical and vice versa with a short press of the
M
button.
=
Align the defective pixel with the fixed cross in the
frame – the pixel should disappear.
=
Press
briefly
М
to confirm
.
=
A marker
(H)
appears on the left side of the
display.
=
On the right side of the display appears
«magnifying glass»
(G)
– a magnified image in a
frame with a fixed cross , designed for easier
detection of a defective pixel and to match the
pixel with the marker, horizontal and vertical
arrows for X and Y axes
(I)
showing marker's
movement.
=
Delete the defective pixel with a short press of the
REC (4)
button.
=
A brief message
«OK»
appears in the frame in
case of success.
=
Then you can delete another defective pixel by
moving the marker along the display.
=
Exit «Defective pixel repair» with a long press of
the
M
button.
=
With a short press of the
UP
/
DOWN
buttons
move the marker to align it with a defective pixel.
=
Press and hold down the
М
(3)
button to enter the
main menu.
=
If error occurs the message
«Connection failed»
appears . Repeat the procedure.
=
The RC is activated and ready for use.
=
If activation is successful, the message
«Connection complete»
appears .
=
To unlink the RC, press the
М
button, wait for the
countdown to expire without pressing any RC
button for 30 sec.
=
All remote controls previously linked to your
device are now unlinked.
=
Select option «
» with the
UP
Remote Control
(2)/DOWN (5)
buttons
.
Press
briefly
М
to confirm
.
=
Press
briefly
М
to confirm
.
=
Press and hold down the
М
(3)
button to enter the
main menu.
Return to default defective pixel pattern
=
Confirm selection with a short press of the
M
button.
This option allows you to cancel deletion of the
defective pixels and return them to the original
state.
=
Select
«Yes»
if you wish to return to default
defective pixel pattern, or
«No»
if you do not.
=
Enter the submenu with a short press of the
M
button.
=
Select icon and press
М
.
18
17
