24
8. Replacement Parts
8.1 KOPkit Program
GLM
®
DM7 KOPkits contain all replacement parts normally used in a preventative
maintenance program. (
PULSAlube
oil is also available separately for preventative
maintenance programs. Refer to
Section 6 – Equipment Startup
). There is a specific
KOPkit for every GLM
®
pump model. Each KOPkit is vacuum-packed for extended storage.
All GLM
®
pumps have the KOPkit number identified on the pump nameplate and Pulsafeeder
order documents. KOPkits can also be selected from the technical data sheet shipped with
the pump or by a Pulsafeeder representative. A list of the GLM
®
KOPkit numbers can also be
found on the next page. The kit is identified by the model number of the pump, the wetted end
material, and the process connection thread type. For models with tie-bar type check valves,
the appropriate components (check valve balls, seats, and o-rings) are supplied instead of the
cartridges pictured.
Figure 16, KOPkit
parts
8.2 Ordering KOPkits or Parts
When ordering replacement parts always specify:
• Pump model and serial number (from pump nameplate), e.g., Model No. (DM7) with Serial
No. F406365-3.
• Part number and description from the GLM
®
parts list. Include the three-character suffix.
(Note: GLM
®
part numbers begin either with the letters
NP
, or the letter
W
, e.g.,
NP170001-THY or W210221-001.)
Summary of Contents for PULSA GLM7
