Appendix 1
Guidance and manufacturer’s declaration – electromagnetic
emissions- for all EQUIPMENT and SYSTEMS
Guidance and manufacturer’s declaration – electromagnetic emission
The is intended for use in the electromagnetic environment
specified below. The customer of the user of the should
assure that it is used in such and environment.
Emission
test
Compliance
Electromagnetic environment –
guidance
RF
emissions
CISPR 11
Group 1
The uses RF energy only for
its internal function. Therefore, its RF
emissions are very low and are not
likely to cause any interference in
nearby electronic equipment.
RF
emission
CISPR 11
Class B
The is suitable for use in all
establishments other than domestic
and those directly connected to a low
voltage power supply network which
supplies buildings used for domestic
purposes.
Guidance and manufacturer’s declaration – electromagnetic
immunity – for all EQUIPMENT and SYSTEMS
Guidance and manufacturer’s declaration – electromagnetic immunity
The is intended for use in the electromagnetic environment
specified below. The customer or the user of should assure
that it is used in such an environment.
Immunity
test
IEC
60601
test
level
Compliance
level
Electromagnetic
environment -
guidance
Electrostatic
discharge
(ESD)
IEC 61000-4-
2
6 kV
contact
8 kV
air
6 kV
contact
8 kV air
Floors should be
wood, concrete or
ceramic tile. If floor
are covered with
synthetic material,
the relative humidity
should be at least
30%.
Power
frequency
(50/60Hz)
3A/m
3A/m
Mains power quality
should be that of a
typical commercial